![]() The nozzle diameter of the SM2 is 0,40mm. That has something to do with my prefered start script. I also changed the starting point settings. The fact that the first layer settings can only be configured in relation to normal speed and normal layer high is also the reason why the auto-config quality settings are not working for me (the percentages are not part of the quality settings). The speed setting for firt layer is not applied to the “Additions” (Skirt). With 40% speed you get 1440 mm/min for a good stickiness of the first layer. ![]() I allways use a first layer high of 0,200mm independet from the quality setting because this is best working for my calibration behavior. A layer is allways started with the most inner wall -> outer wall -> infill. So I chose 0,2400 for the layer high and I think this is the maximum you can get out of a 0,4 nozzle without bigger quality problems.ģ Layers for top, bottom and walls is good start for now and also what Luban does. For “Fast” priting I chose the same settings like in Luban.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |